Page: 1 of 6
:
:
:
:
:
============================================================================================
:
:
:
No. : KA/2013/81128 Date : 2013/08/29
Test Report
MINMAX TECHNOLOGY CO.,LTD
Test Result(s)
Testing Period
2013/08/26
2013/08/26 TO 2013/08/29
Please refer to next pages.
As specified by client, to test Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs
contents in the submitted sample.
Test Requested
Sample Receiving Date
Test Method
18,SHIN-SIN ROAD,TAINAN 702,TAIWAN
Style/Item No.
DC-DC CONVERTER
MSCW01-XXXXX SERIES
The following sample(s) was/were submitted and identified by/on behalf of the client as:
Sample Description
Please refer to next page(s).
Sample Submitted By MINMAX TECHNOLOGY CO.,LTD
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61
t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.除非另有說明,此報告結果僅對測試之樣品負責。本報告未經本公司書面許可,不可部分複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits
of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under
the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
Page: 2 of 6
No. : KA/2013/81128 Date : 2013/08/29
Test Report
MINMAX TECHNOLOGY CO.,LTD
18,SHIN-SIN ROAD,TAINAN 702,TAIWAN
Test Result(s)
Result
No.1
mg/kg With reference to IEC 62321-5: 2013
and performed by ICP-AES.
2 n.d.
mg/kg With reference to IEC 62321-5: 2013
and performed by ICP-AES.
2 22.5
mg/kg With reference to IEC 62321-4: 2013
and performed by ICP-AES.
2 n.d.
mg/kg With reference to IEC 62321: 2008 and
performed by UV-VIS.
2 n.d.
mg/kg - n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg - n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
mg/kg 5 n.d.
Lead (Pb)
Mercury (Hg)
PART NAME No.1
Test Item(s)
MIXED ALL PARTS:DC-DC CONVERTER
Sum of PBBs
Cadmium (Cd)
With reference to IEC 62321: 2008 and
performed by GC/MS.
Decabromobiphenyl
Pentabromobiphenyl
Hexavalent Chromium Cr(VI)
Monobromobiphenyl
Hexabromodiphenyl ether
Hexabromobiphenyl
Nonabromodiphenyl ether
MDLMethodUnit
Tetrabromodiphenyl ether
Decabromodiphenyl ether
Octabromodiphenyl ether
Tetrabromobiphenyl
Dibromodiphenyl ether
Monobromodiphenyl ether
Tribromodiphenyl ether
Sum of PBDEs
Heptabromobiphenyl
Octabromobiphenyl
Nonabromobiphenyl
Heptabromodiphenyl ether
Pentabromodiphenyl ether
Dibromobiphenyl
Tribromobiphenyl
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61
t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.除非另有說明,此報告結果僅對測試之樣品負責。本報告未經本公司書面許可,不可部分複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits
of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under
the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.