Comtelco Antennas, now a Mobile Mark brand. Made in U.S.A. Specifications subject to change without notice.

www.mobilemark.com 1-847-671-6690 www.comtelcoantennas.com

Technical Specification BSL150XL3

144-174 MHz 3dBd Gain BASE STATION ANTENNA

Reliable Performance: Rated at 250 watts and 3 dB gain, you

can expect years of continuous service from this heavy duty

antenna.

Rugged Construction: The radiating elements are supported

internally and constructed of copper alloy. They are welded and/or

soldered to prevent any intermodulation. They are then encased in

a fiberglass radome for total environmental protection.

Weatherproof: The fiberglass radome is ultraviolet inhibited. The

heavy wall aluminum mounting sleeve is epoxy coated for superior

weather protection.

Lightweight: These antennas are lightweight at less than 12 lbs.

but are designed to easily withstand winds of over 125 MPH.

Simple installation: Using the optional BSLMNT2 mounting kit,

installation takes only minutes.

ELECTRICAL SPECIFICATIONS

Part No. Frequency

BSL150XL3-A 144-148MHz

BSL150XL3-B 150-156MHz

BSL150XL3-BC 153-159MHz

BSL150XL3-C 156-162MHz

BSL150XL3-D 162-168MHz

BSL150XL3-E 168-174MHz

GAIN: 3 dBd

VSWR: <2.0:1

BANDWIDTH: 6 MHz

POWER RATING: 250 watts

IMPEDANCE: 50 ohms

VERT BEAMWIDTH: 40°

MECHANICAL SPECIFICATIONS

RADIATOR: Internal copper alloy elements

RODOME: 1.5" (4cm)dia. White UV inhibited

fiberglass

MOUNTING SLEEVE: 1.95" (1.91cm)dia. 10" (25.4cm) heavy

wall epoxy coated

TERMINATION: Female N

LENGTH: 98" (2.48cm)Maximum

WEIGHT: 12 lbs. (5.4kg)

FLAT PLATE AREA: .66 ft

WIND RATING: 125 MPH (201kph)

LATERAL THRUST: 44.5 lbs. (20.1kg)