105
SMD Leaded
0.1
1
10
100
1000
2R2
470
4R7
220
100
1 10000100010010
0.1
1
10
100
1000
0111.0
220
2R2
470
100
4R7
Inductance vs. DC Current
Inductance (uH)
Inductance (uH)
Inductance vs. Frequency
DC Current (A)Frequency (KHz)
CSS0218P Series (SHIELDED)
■
SMD Wire Wound Power Inductors
MECHANICAL DIMENSIONS
Part Number Marking
Inductance
(µH)
Test Freq.
(KHz)
DCR
(m
Ω)
Max.
Rated Current
(mA)
Isat
(mA)
CSS0218P-2R2N-LRH 2R2 2.2 100 41 2300 850
CSS0218P-3R3N-LRH 3R3 3.3 100 54 2100 750
CSS0218P-4R7N-LRH 4R7 4.7 100 78 1650 630
CSS0218P-6R8N-LRH 6R8 6.8 100 106 1320 520
CSS0218P-100N-LRH 100 10.0 100 180 1000 430
CSS0218P-150N-LRH 150 15.0 100 220 800 350
CSS0218P-220N-LRH 220 22.0 100 320 680 300
CSS0218P-330N-LRH 330 33.0 100 460 560 240
CSS0218P-470N-LRH 470 47.0 100 660 480 200
ELECTRICAL SPECIFICATION
• Tolerance: N=±30%；M=±20%；L=±15%
• Operating Temperature Range: -30
℃ to +100℃ (Including self-generated heat)
• Inductance measured using the HP4284A
；Chroma3302+1320
• DCR measured using the 16502 milli-ohm meter
• Inductance drop no more than 35% of initial value at Isat, temperature rises
△ t<40℃ at rated current.
• Storage Temperature Range: -40
℃ to +85℃
CHARACTERISTIC CURVE
CSS0218P Series
CSS0218P
unit: mm
XXX
3.2 Max.
3.2 Max.
2 Max.
Ø2.1±0.1
3.3
1.0
1.7
1.3
4.3
1.3
Recommended Patterns