New Electro Mechanical Crimp
Tool - EMC3300 from DMC!
2.2 Pounds (.99 KG) Weight with Battery and Crimp Dies
• Advanced Ergonomic Tool Design with “Safe
Distance” Trigger Closing Control
• Pre-Clamp Function to Improve Cycle-
Time and Quality
• Crimp Cycle Time is 1.3 Seconds
• 250 Crimps per Charge
• Li-Ion 10.8 Volt Battery and Charger
• Built-in LED Light
• Data Retrieval Available
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA
PHONE (407) 855-6161 • FAX (407) 855-6884 • www.DMCTools.com • E-MAIL: DMC@DMCTools.com
See back page for additional information
Ordering Guide
DMC Part Number Description
EMC3300 Tool Kit with 110-120 Volt Charger and one battery
EMC3300-230 Tool Kit with 220-240 Volt Charger and one battery
HDE-MBC110 110-120 Volt Charger only
HDE-MBC220 220-240 Volt Charger only
HDE-MBP108 10.8V Battery only
HDE-USB USB Adapter Module
Available Dies
DMC Part Number Application Notes
EMC-101D W, R, B, Y Insulated Spare Wire Caps
EMC-102D R, B, Y Insulated Terminals
EMC-102DL Same as EMC-102D plus Locator
EMC-106D .042 sq, .128 hex, .178 hex
EMC-108D .068 sq, .213 hex, .255 hex
EMC-117D .128 hex, .178 hex, .213 hex, .255 hex
EMC-129D M81824/1-X splices (comparable to M22520/37-01)
EMC-1005D Uninsulated Terminals 10-22AWG (comparable to TE49935)
EMC-1006D High Temp Uninsulated Terminals 10-22AWG (comparable to TE46447)
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA
PHONE (407) 855-6161 • FAX (407) 855-6884 • www.DMCTools.com • E-MAIL: DMC@DMCTools.com
• Tool kit consists of a molded case, one bat-
tery and charger. See Ordering Guide in the
table below.
• Dies are sold separately, see Available Dies in
the table below.
• Contact DMC for custom engineered die sets.