www.cynergy3.com
© 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO
9001
CERTIFIED
IWR-5
Five Channel Wireless Receiver
IWR-5 2018
Description
The IWR-5 is a five channel receiver designed to pair with the IWPT series of wireless pressure transducers to form a cost effective replacement of
the traditional wired pressure transducer. This offers a low cost solution to inaccessible or expensive installation environment
The receiver has user selectable voltage or mA outputs corresponding to the calibrated pressure range of the remote Wireless Pressure
Transducers and 5A rated changeover contacts for alarm functionality.
User channel configuration is possible with the use of the program, IWR-Set, which ensures minimal user set-up time and thus ensures a simple
solution to multi-channel pressure measurement applications. With the standard 0dBI antenna, a line-of-sight range of up to 500m can be
achieved and, using the optional 3dBI antenna, up to 750m (LOS) is achievable.
End-to-end accuracy of 0.25% FS BFSL
±
DIN rail or wall mounting kits available
LED indication of wireless link
Single channel receiver available - see data sheet IWR-1
Pairs with the IWPT wireless pressure transducer
Simple software or DIL switch pairing with IWPT pressure
transducers
12 to 32 Vdc powered
Up to 750m range, line-of-sight
User-selectable 1-5V or 4-20mA receiver output
Clean contact output for process, low battery or loss of signal
alarm function
Electrical Protection
Outputs (5 off) User selectable 1-5V or 4-20mA
Alarm Output (1 off) 5 Amp rated changeover contacts
Receiver Update Rate* 10 seconds as standard.
Alternative user setable rates :
- 1,5, 10 and 30 seconds
*Consult IWPT Installation manual and data sheet for set-up of alternative transmission rates.
Enclosure Specifications
Dimensions 160 mm x 80 mm x 57 mm
Material* Light grey ABS (RAL7035)
Protection Class IP65
Weight
255g inc. 0dBI antenna (+12g with 3dBI)
Installation Position** Any
* Other materials on request
** Consult Installation Manual to ensure adequate signal path between transmitter and receiver
Receiver Input
*Receiver Frequency 2.4GHz
System Channel Standard setting, however
user adjustable in multiple
instrument systems.
Antenna Enclosure mounted 0dBi
*Compliant with EN 300 328, V1.8.1
System Performance (@ +20°C)
Accuracy <±0.25% FS BFSL
Setting Errors (offsets)* Zero and Full Scale <±0.5% FS
* End-to-end zero tare function available , see user manual.
Instrument Power Source
DC Power 12 to 32Vdc
Temperature Ratings
Operating Temperature -10°C to +50°C
Storage Temperature -20°C to +80°C
Ordering Codes
Pressure Transducer: See IWPT & IWPTL datasheets
Single Channel Receiver: IWR-1
Five Channel Receiver: IWR-5
Five Channel Configuration Software* IWR-Set
3dBi Antenna (enclosure mount) IANT-3
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
Telephone +44 (0) 1202 897969
Email:sales@cynergy3.com
Made in the UK
*Download user configuration software here: -
https://www.cynergy3.com/sites/default/files/IWR%20Set%20v1.0.exe