Conclusion

MAX7356ETG+

The MAX7356ETG+ successfully meets the quality and reliability standards required of all Maxim products. In addition, Maxim"s

continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim"s quality and reliability standard s.

Table of Conte n ts

I. ........Device Description V. ........Quality Assurance Information

II. ........Manufacturing Information VI. .......Reliability Evaluation

III. .......Packaging Information IV. .......Die Information

.....Attachments

I. Device Description

A. General

The MAX7356/MAX7357/MAX7358 8-channel I²C switches/multiplexers expand the main I²C bus to any combination of 8 extended I²C buses. They

enable a master on the main bus to isolate and communicate with devices or groups of devices that may otherwise have slave address conflicts. Any

extended bus can be connected or disconnected by control packets from the main I²C bus writing to the main control register of these I²C switches.

The MAX7357 and MAX7358 feature an enhanced mode that includes a built-in timer used to monitor all extended buses for lock-up conditions. If the

clock or data line of any of these buses is low for more than 25ms (typ), a lock condition is detected. An optional interrupt can be generated through

the bidirectional active-low RST/active-low INT. The master can read the bus lock-up register to find out which extended bus is locked up. The master

can also enable the MAX7357 or the MAX7358 to send a "flush-out" sequence on the faulty channel. There is an optional preconnection check that

can be enabled to toggle the extended bus clock and data line low then high to ensure the downstream bus is not locked high prior to connecting it to

the host bus. The MAX7356/MAX7357/MAX7358 are transparent to signals sent and received at each channel, allowing multiple masters. Any de vice

connected to an I²C bus can transmit and receive signals; however, only the master connected to the host side of the MAX7356/MAX7357/MAX7358

should address the device. The MAX7356/MAX7357/MAX7358 are available in 24-pin TSSOP and TQFN packages and are specified over the

extended -40°C to +85°C temperature range.