Product Data Sheet
DeWAL® DW916-2
• Removes cleanly at elevated temperatures
• Good solvent resistance
• Outgassing requirements under ASTM E-595
• Silicone Free - FTIR - No traceable amounts of silicone
• Composite bonding shops
• Captures excess "flash" or residue created within
autoclave environments
The information contained in this Data Sheet is intended to assist you in designing with Rogers’ Elastomeric Material Solutions.
It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or
fitness for a particular purpose or that the results shown in this document will be achieved by a user for a particular purpose.
The user should determine the suitability of Rogers DeWAL products for each application. The Rogers logo, DeWAL logo and
DeWAL are trademarks of Rogers Corporation or one of its subsidiaries. © 2019 Rogers Corporation.
All rights reserved. 0819-PDF • Publication #175-122
Features & Benefits:
*Typical values sh
o
w
n
are from te
s
ting at date of manufacture and should not be
used
for specification limits.
- A
dditional technical information
and pr
oduct sp
ecifications are a
vailable u
po
n request.
- Shelf
l
ife is 1 year from the date of manufacture with storage conditions of 21°C (70°F) and 50% RH.
- All metric conversions are approximate.
PHYSICAL
Backing Material
---
Polyester Film
Backing Thickness, mm (inches )
0.043 – 0.058
(0.0017 – 0.0023)
---
Adhesive System
---
Acrylic
Adhesive Thickness, mm (inches )
0.043 – 0.058
(0.0017 – 0.0023)
---
Adhesion, g/cm (oz./in) ASTM D-1000
335 – 480
(30 – 43)
401 (36)
Outgassing ASTM-E 595
Pass
Maximum Operating Temperature, C° (F°)
176 (350)
for 2 hours
PRODUCT DIMENSIONS METRIC
Width mm, inches
0.25 – 17 6.35 – 432
Core Diameter mm, inches
3
76
Roll Length m, yards
72
66
E
NGLISH
PROPERTY TEST METHOD
DATA RANGE
TYPICAL VALUE*
DeWAL® DW 916-2 is a purple polyester tape coated
with a proprietary, silicone-free, acrylic adhesive. DW
916-2 will remove cleanly at elevated temperatures and
has good solvent resistance. This product passes all low
outgassing requirements as stated in ASTM E-595.
Applications: