MULTILAYER CERAMIC CHIP CAPACITORS
◆
RATINGS
-55 to +125℃1. Category Temperature Range
25, 35, 50, 100, 250, 500Vdc2. Rated Voltage Range
0.010 to 47
µ
F3. Rated Capacitance Range
M (±20%) : Standard, K (±10%) 4. Rated Capacitance Tolerance
5. Temperature Characteristics
6. Rated Ripple Current
X7R
See No.5 on the following table
◆
SPECIFICATIONS
No abnormality.
Withstand voltage
250% of rated voltage
130% of rated voltage
Shall be applied for 5 seconds.
More than 250V
Less than 500V
100V +
150% of rated voltage
Withstand Voltage1
3 Rated Capacitance Within specified tolerance.
4 Dissipation Factor 5.0% maximum.
2 Insulation Resistance 100/C
R(MΩ) or 4000(MΩ)
whichever is less.
Rated voltage shall be applied for 60±5 seconds at
temperature 25±2℃.
Test ConditionSpecificationItemsNo.
5 Rated Ripple Current See STANDARD RATINGS
10kHz~1MHz (sine curve)
Ripple voltage Vp shall be less than
the rated voltage.
Temperature
Frequency
Voltage
1±0.1kHz
1±0.2Vrms
25±2℃
120±12Hz
0.5±0.2Vrms
C
R≦10µF CR>10µF
◆
FEATURES
1. Large capacitance by small size.
2. Excellent noise absorption.
3. High permissible ripple current capability.
4. NTF: Temperature cycle : 1000 cycles.
◆
APPLICATIONS
1. Smoothing circuit of DC-DC converters.
2. On-board power supplies.
3. Voltage regulators for computers.
3. Noise suppressor for various kinds of equipments.
4. High reliability equipments.
◆
CONSTRUCTION
Ceramic Dielectric
Termination
(Tin Plating)
Internal Electrode
Temperature cycle : 1000 cycles
RoHS2
Compliant
NTS
Series
/
NTF
Series
As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic
capacitors. Please contact us for more information.
Rated voltage
More than 500V
Less than 250V
PRECAUTIONS AND GUIDELINES
MULTILAYER CERAMIC CAPACITORS
◆
MULTILAYER CERAMIC CHIP CAPACITORS
STANDARDIZATION
The following series were discontinued.Please use the replacements in the table.
◆
METAL CAP TYPE MULTILAYER CERAMIC CAPACITORS
◆
DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS
Discontinued series Characteristics Replacements Page
Y5U, Termination (Tin Plating)
Y5U, Termination (Silver)
Y5U, Termination (Tin Plating), Down sized
Y5U, Termination (Silver), Down sized
Y5U, Termination (Tin Plating), High Reliability
NTS
NTS
NTS
NTS
NTF
13
13
13
13
13
TCCS
TCCR
THCS
THCR
TMCS
Y5U
Y5U, Down sized
Y5U, Down sized, High Reliability
NTJ
NTJ
NTJ
22
22
22
TCP
THP
TMP
Y5U
Y5U, Down sized
NTD
NTD
25
25
TCD
THD
Discontinued series Characteristics Replacements Page
Discontinued series Characteristics Replacements Page
Lead oxides are included as a dielectric material in the discontinued series (Y5U characteristics) on the above lists.
Under RoHS directive, such Lead (Pb) was already restricted from January 1, 2013. Under ELV directive, it is restricted from
January 1, 2016.
Please use the replacements which are RoHS compliant.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
13 CAT. No. E1002Y
01_積層セラミックコンデンサ_英_CS6.indd 13 19/04/02 13:23