TAI-TECH
www.tai-tech.com.tw
P2
5. Specification
Part Number
Inductance
L0 A(uH)
±20%
Heat Rating
Current DC
( A )I rms.
Saturation
Current DC
(A)I sat.
DCR
(mΩ)
Typ
DCR
(mΩ)
Max
Typ Max Typ Max
TMHC1707SPV-R47MN-D 0.47 60 55 115 100 0.75 0.83
TMHC1707SPV-1R0MN-D 1.00 48 43 68 60 1.30 1.50
TMHC1707SPV-1R5MN-D 1.50 42 37 55 48 1.80 2.10
TMHC1707SPV-2R2MN-D 2.20 40 35 45 40 2.50 2.80
TMHC1707SPV-3R3MN-D 3.30 28 25 40 35 3.50 3.90
TMHC1707SPV-4R7MN-D 4.70 26 23 37 32 4.80 5.50
TMHC1707SPV-5R6MN-D 5.60 24 21 35 31 5.90 6.80
TMHC1707SPV-6R8MN-D 6.80 22 18 30 25 8.40 9.20
TMHC1707SPV-8R2MN-D 8.20 18 15 28 24 9.60 10.8
TMHC1707SPV-100MN-D 10.0 17 14 25 21 11.6 13.0
TMHC1707SPV-150MN-D 15.0 14 12.5 23 20 16.5 19.5
TMHC1707SPV-180MN-D 18.0 13.0 11.0 21 18.0 20.0 24.0
TMHC1707SPV-220MN-D 22.0 12.0 10.0 19.0 17.0 24.0 27.6
TMHC1707SPV-270MN-D 27.0 11.3 9.5 17.0 15.0 31.0 36.0
TMHC1707SPV-330MN-D 33.0 10.7 9.0 15 13 36.0 42.0
TMHC1707SPV-470MN-D 47.0 8.7 7.0 13 11 46.0 53.0
Note:
1. Test frequency : Ls : 100KHz /1.0V.
2. All test data referenced to 25℃ ambient.
3. Testing Instrument(or equ) : L: HP4284A,CH11025,CH3302,CH1320,CH1320S LCR MET ER / Rdc:CH16502,Agilent33420 A MICRO OHMMETER.
4. Heat Rated Current (Irms) will cause the coil temperature rise approximately ΔT of 40 ℃
5. Saturation Current (Isat) will cause L0 to drop approximately 30%.
6. The part t em per a tur e (ambient + te mp ri se) should not exceed 155 under worst case operati ng conditions℃ .Circuit desig n,component,PCB trace si ze and
thickness,airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
7. Special inquiries besides the above common used types can be met on your requirement.