1
PLZ-5W SR Specifications
Unless specified otherwise, the specifications are for the following settings and conditions.
• The product is warmed up for at least 30 minutes.
• TYP:These are typical values that are representative of situations where the product oper-
ates in an environment with an ambient temperature of 23 °C (73.4 °F). They are not guar-
anteed performance values.
• set: Indicates a setting.
• range: Indicates the rated value of each range.
• Values indicated by “reading” are readings.
PLZ6005W SR, PLZ10005W SR ..............................................p. 2
PLZ15005W SR, PLZ20005W SR ............................................p. 12
Part No. IB030832
Jan 2019
2 PLZ-5W SR Specifications
PLZ6005W SR, PLZ10005W SR
Ratings
Constant current (CC) mode
Item PLZ6005W SR PLZ10005W SR
Operating voltage (DC)
*1
*1. The minimum operating voltage at which current starts flowing through the product is 0.3 V. At the load
input terminals on the rear panel.
1 V to 150 V
Current 1200 A 2160 A
Power 6.0 kW 10.8 kW
Load input terminal’s isolation voltage ±500 V
Item PLZ6005W SR PLZ10005W SR
Operating range H range 0.00 A to 1200.00 A 0.00 A to 2160.00 A
M range 0.000 A to 120.000 A 0.000 A to 216.000 A
L range 0.0000 A to 12.0000 A 0.0000 A to 21.6000 A
Setting range H range 0.00 A to 1260.00 A 0.00 A to 2268.00 A
M range 0.000 A to 126.000 A 0.000 A to 226.800 A
L range 0.0000 A to 12.6000 A 0.0000 A to 22.6800 A
Resolution H range 0.05 A
M range 0.005 A
L range 0.0005 A
Setting accuracy H range ±(0.2 % of set + 0.3 % of range)
M range ±(0.2 % of set + 0.3 % of range)
L range ±(0.2 % of set + 1 % of range)
Input line regulation
*1
*1. When the input voltage is changed from 2 V to 150 V at a current of rated power/150 V.
120 mA 216 mA
Ripple
*2
*2. At 100 A measurement current.
rms
*3
*3. Measurement frequency bandwidth 10 Hz to 1 MHz.
120 mA 216 mA
p-p
*4
*4. Measurement frequency bandwidth 10 Hz to 20 MHz.
1.0 A 1.8 A