ATtiny416/417/816/817
Automotive
AVR
®
Microcontroller with Core Independent Peripherals
and picoPower
®
Technology
Introduction
The ATtiny416/417/816/817 Automotive microcontrollers are using the high-performance, low-power
A
VR
®
RISC architecture, and are capable of running at up to 16 MHz, with up to 4/8 KB Flash, 256/512
bytes of SRAM, and 128 bytes of EEPROM in a 20-pin package. or 24-pin package.The series uses the
latest technologies with a flexible and low-power architecture including Event System and SleepWalking,
accurate analog features, and advanced peripherals. Capacitive touch interfaces with driven shield are
supported with the integrated QTouch
®
peripheral touch controller.
Features
• CPU
–
AVR
®
8-bit CPU
– Running at up to 16 MHz
– Single-cycle I/O access
– Two-level interrupt controller
– Two-cycle hardware multiplier
• Memories
– 4/8 KB In-system self-programmable Flash Memory
– 128B EEPROM
– 256/512B SRAM
– Write/erase endurance:
• Flash 10,000 cycles
• EEPROM 100,000 cycles
– Data retention: 20 years at 85°C
• System
– Power-on Reset (POR)
– Brown-out Detection (BOD)
– Clock options:
• Lockable 16 MHz low-power internal RC oscillator
• 32.768 kHz Ultra Low-Power (ULP) internal RC oscillator
• 32.768 kHz External Crystal Oscillator
• External clock input
– Single Pin Unified Program Debug Interface (UPDI)
– Three sleep modes:
© 2018 Microchip Technology Inc.
Datasheet Preliminary
DS40002014A-page 1
• Idle with all peripherals running and mode for immediate wake-up time
• Standby
– Configurable operation of selected peripherals
– SleepWalking peripherals
• Power-down with wake-up functionality
• Peripherals
– 6-channel event system for CPU independent and predictable inter-peripheral signaling
– One 16-bit Timer/Counter Type A (TCA) with dedicated period register, three compare channels
– One 16-bit Timer/Counter Type B (TCB) with input capture
– One 12-bit Timer/Counter Type D (TCD) optimized for control applications
– One 16-bit Real-Time Counter (RTC) running from external crystal or internal RC oscillator
– One USART with fractional baud rate generator, auto-baud, and start-of-frame detection
– Master/slave Serial Peripheral Interface (SPI)
– Master/slave TWI with dual address match
• Standard mode (Sm, 100 kHz)
• Fast mode (Fm, 400 kHz)
• Fast mode Plus (Fm+, 1 MHz)
– Configurable Custom Logic (CCL) with Two Programmable Look-up Tables (LUT)
– Analog Comparator (AC) with low propagation delay
– 10-bit 115ksps Analog-to-Digital Converter (ADC)
– 8-bit Digital-to-Analog Converter (DAC)
– Five selectable internal voltage references: 0.55V, 1.1V, 1.5V, 2.5V, and 4.3V
– Automated CRC memory scan
– Watchdog Timer (WDT) with Window mode, with separate on-chip oscillator
�� Peripheral Touch Controller (PTC)
(1)
• Capacitive touch buttons, sliders, and wheels
• Wake-up on touch
• Driven shield for improved moisture and noise handling performance
• Six self-capacitance and nine mutual-capacitance channels
– External interrupt on all general purpose pins
• I/O and Packages:
– 18/22 programmable I/O lines
– 20-pin VQFN 3x3
– 24-pin VQFN 4x4
• Temperature Ranges:
– -40°C to 105°C
– -40°C to 125°C temperature graded device options available
• Speed Grades:
– 0-5 MHz @ 1.8V – 5.5V
– 0-10 MHz @ 2.7V – 5.5V
– 0-16 MHz @ 4.5V – 5.5V
Note:
1. Only available in devices with 8 KB Flash.
ATtiny416/417/816/817 Automotive
© 2018 Microchip Technology Inc.
Datasheet Preliminary
DS40002014A-page 2