SAFETY DATA SHEET
1. Identification
BERGQUIST GAP FILLER TGF 1450Product identifier
Other means of identification
Part A
Product code
Liquid Gap Filling Material used together with part B.
Recommended use
None known.
Recommended restrictions
Manufacturer/Importer/Supplier/Distributor information
The Bergquist Company
Manufacturer/Supplier
18930 West 78th Street
Address:
Chanhassen, MN. 55317
1-800-347-4572
Non-Emergency calls:
AEHMSDS@henkel.com
Contact person:
Emergency telephone
number
Chemical Emergency
Call CHEMTREC Day or
Night
1-800-424-9300
Within USA and Canada:
+1 703-527-3887 (Collect Calls Accepted)
Outside USA and Canada:
2. Hazard(s) identification
Category 4Flammable liquids
Physical hazards
Not classified.
Health hazards
Not classified.
OSHA defined hazards
Label elements
None.
Hazard symbol
Signal word
None.
Hazard statement
The mixture does not meet the criteria for classification.
Precautionary statement
Prevention
Observe good industrial hygiene practices.
Response
Wash thoroughly after handling.
Storage
Store away from incompatible materials.
Disposal
Dispose of waste and residues in accordance with local authority requirements.
Hazard(s) not otherwise
classified (HNOC)
None known.
Supplemental information
This product is not hazardous according to OSHA 29 CFR 1910.1200 requirements, therefore a
hazard label does not apply.
3. Composition/information on ingredients
Mixtures
The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR 1910.1200.
4. First-aid measures
Move to fresh air. Get medical attention if symptoms occur.
Inhalation
Wash skin with soap and water. Get medical attention if irritation persists after washing.
Skin contact
Flush thoroughly with water. If irritation occurs, get medical assistance.
Eye contact
Rinse mouth thoroughly. Get medical attention if any discomfort occurs.
Ingestion
BERGQUIST GAP FILLER TGF 1450 SDS US
923384 Version #: 01 Revision date: - Issue date: 11-August-2017
1 / 6
Under normal conditions of intended use, this material does not pose a risk to health.
Most important
symptoms/effects, acute and
delayed
Treat symptomatically.
Indication of immediate
medical attention and special
treatment needed
Get medical attention if any discomfort develops.
General information
5. Fire-fighting measures
Use fire-extinguishing media appropriate for surrounding materials.
Suitable extinguishing media
None known.
Unsuitable extinguishing
media
None.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Selection of respiratory protection for firefighting: follow the general fire precautions indicated in
the workplace.
Special protective equipment
and precautions for firefighters
Move containers from fire area if you can do so without risk.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
This product is not flammable.
General fire hazards
6. Accidental release measures
Avoid contact with skin and eyes. For personal protection, see Section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Sweep up or gather material and place in appropriate container for disposal. For waste disposal,
see section 13 of the SDS.
Methods and materials for
containment and cleaning up
Environmental Manager must be informed of all major spillages.
Environmental precautions
7. Handling and storage
Provide adequate ventilation. Avoid inhalation of dust and contact with skin and eyes. Observe
good industrial hygiene practices. Wear appropriate personal protective equipment (See Section
8).
Precautions for safe handling
Store in closed original container in a dry place. Store away from incompatible materials.
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-3 (29 CFR 1910.1000)
ValueComponents
Form
Type
TWA 5 mg/m3 Respirable fraction.Aluminum hydroxide (CAS
21645-51-2)
15 mg/m3 Total dust.
50 mppcf Total dust.
15 mppcf Respirable fraction.
US. ACGIH Threshold Limit Values
ValueComponents
Form
Type
TWA 1 mg/m3 Respirable fraction.Aluminum hydroxide (CAS
21645-51-2)
No biological exposure limits noted for the ingredient(s).
Biological limit values
Follow standard monitoring procedures.
Exposure guidelines
Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne
levels below recommended exposure limits.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Risk of contact: Wear approved safety goggles.
Eye/face protection
BERGQUIST GAP FILLER TGF 1450 SDS US
923384 Version #: 01 Revision date: - Issue date: 11-August-2017
2 / 6