AUTOMOTIVE
SOLUTIONS
®
3
2
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
2
1
3
4
5
6
7
8
9
11
12
13
10
YAMAICHI ELECTRONICS AUTOMOTIVE PRODUCTS
Based on our wide product range Yamaichi Electronics offers many solutions which are dedicated to
automotive applications. Products which have a reliable design and functionality especially for the rough
environmental and mechanical conditions in automotive use.
The range of our products is going from non-ZIF connectors, like the Y-Lock connector system, to
connectors which can also match High Speed requirements. Connectors for internal use are the BEC-
series, means the 230 pin Board Edge connector family, or the Floating Board-to-Board series HF301.
For I/O applications Yamaichi is not only able to supply a big choice of card connectors, but also
standardised interfaces like Fakra/HSD connections, a complete USB range or HDMI solutions. The
Y-Quad connector for Quadlock connection boxes belongs as well to the connector family. For all the
different connector systems Yamaichi Electronics is able to develop and supply also the suitable test
adapter for the production lines.
REFERENCE APPLICATIONS
•Head units for infotainment systems
•Camera systems
•I/O connections for antenna, TV, radio, etc...
•Car computing
•Dashboard applications
•Navigation displays
•Connectivity module, e.g. USB Hub
•Electronic Control Units
•Cradle for mobile phones
•Radar/Lidar System
YAMAICHI ELECTRONICS OFFERS THE FOLLOWING SOLUTIONS
9. Connector Systems for Computing Modules (BEC and Power)
10. Y-CCC - Car Computing Connector
11. Y-Lock
Connector Series
12. High Speed Floating BtB Connectors
13. Wire-to-Board Series
14. Y-Quad Series
15. Module Test Adapters
EUROPEAN DESIGN CENTER
The European design center can offer any kind of customised connector solutions. The final design
respects all customer specific requirements and objectives. The product can be optimised and designed
for production locations around the world.
• About 100 engineers are working in the two design
centers in Munich and Sousse (Tunisia)
• Approximately 400 designs are done per year
• In average 12 patents are applied per year
• Highest level of soft- and hardware is used, e.g.
• All products are qualified and tested in our own
laboratories. The laboraties are well equipped und
capable to execute the required tests.
Molding Flow Simulation
- 3D-CAD-construction software Solid Works
- FEM-calculation software (Finite Element Method) Cosmos
(non-linear force / strength calculation)
- 3D-FEM-calculation software CST
(high frequency/speed, thermal air and creep distances)
- Solid Works stream simulation (for liquids)
- Altium designer, PCB design software
- Circuit simulation with SPICE (ADS)
- Matlab (data analysis)
- Moldflow 2011 (molding simulation)
- High definition 3D prototype printer for plastic and metal parts
- SEM (scanning electron microscope)
- CT Scanner
- Climatic Chamber
- Shock and Vibration Chamber
- Etc...
1. SD/ µSD Card Connectors
2. SIM/µSIM Card Connectors
3. HDMI Series
4. USB Series
5. HSD Connectors
6. FAKRA Connectors
7. Y-FFC - Flexible Flat Cables
8. High Speed FFC/FPC Series
14
15