Lead-Free Current Sensing Resistors
RLM Series
AEC-Q 200-Ver D qualified
Document No
TRLM-200S014C
Issued date
2016/09/28
page
1/6
TA-I TECHNOLOGY CO., LTD
1. Scope：
This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free
RLM series manufactured by TA-I TECHNOLOGY CO., LTD.
2. Type Designation：
RLM 20 F E C R010
Item Series Resistance Packaging Power Rating Resistance
No tolerance
20:2010 F:±1% E: Embossed Tape I=3/4W e.g :
(5025) G:±2% D=3/2W R010=10mΩ
J:±5% S=1/2W
C=1W
3. Construction and Dimension ：
3.1 Construction:
3.2 Dimension:
UNIT : mm
Style
L
W
C
T
Material
RLM20
5.0±0.2
2.5±0.2
1.5±0.3(≦3mΩ)
0.60 ±0.20
Strip： Alloy
Over Coating：Polymer
Compound UL-94V-0 grade
0.6±0.3(R>3mΩ)
Metal Alloy Plate
Over-Coat
Ni / Sn
Plating
Lead-Free Current Sensing Resistors
RLM Series
AEC-Q 200-Ver D qualified
Document No
TRLM-200S014C
Issued date
2016/09/28
page
2/6
TA-I TECHNOLOGY CO., LTD
4. Features:
Type
RLM20
Power Rating
3/2W、3/4W、1/2W、1W
Resistance Value
2~50mΩ
Operation Temperature Range
-55℃~+170℃
Temperature Coefficient of Resistance
±50ppm/℃
Tolerance
±1%,±2%,±5%
Insulation Resistance
Over 100MΩ
Maximum Working Voltage(V)
(P*R)
1/2
5. Reliability Tests :
Test Items
Reference
Condition of Test
Test
Limits
Temperature Coefficient
of Resistance
IEC60115-1 4.8
+25 ~ 125℃
Refer 4.0
High Temperature
Exposure(Storage)
MIL-STD-
202 Method
108
T=125℃,1000hrs,Measurement
at 24hrs after test conclusion.
< ±1%
Low temperature
operation
IEC60115-1 4.23.4
-55 °C for 45 min
< ±0.5%
Temperature Cycling
JESD22
Method
JA-104
1000Cycle (-55℃ to 125
℃),Measurement at 24hrs after test
conclusion.
< ±0.5%
Short time overload
IEC60115-1 4.13
5 X rated power for 5s
< ±0.5%
Biased Humidity
MIL-STD-
202 Method
103
10% Rated voltage at 85
℃,RH:85% ,1000Hrs, Measurement
at 24hrs after test conclusion.
< ±0.5%
Operation life
MIL-STD-
202
Method 108
1000 h at +70 °C, 1.5 h “ON”, 0.5 h
“OFF”
< ±1%
Resistance to Soldering Heat
IEC60115-1 4.18
T=260+/-5℃ solder,10+/-1 sec dwell
< ±0.5%
Mechanical Shock
MIL-STD-
202
Method 213
100g's , Normal duration is 6ms , half
sine shock pulse
< ±0.5%
Resistance to vibration
MIL-STD-
202
Method 204
5g's for 20min.12cycles, 10-2000Hz
<±0.5%
Board Flex
AEC-Q200-
005
Min 2mm deflection ,60sec.
< ±0.5%
Flammability
UL-94
V-0 or V-1are acceptable, Electrical
test not required