1
1
2
1
No. of
circuits
Receptacle
housing
Model No.
Panel hole dimensions (mm)
General tolerance
A, B, D: 0.13 C, E: 0.1
CDAB
Applicable
panel
thickness
(mm)
2
3
4
4
VLR-02V
VLR-03V
VLR-04V
VLR-04VN
5.7
5.7
7.0
5.7
13.8
20.0
13.8
26.2
20.6
26.8
20.6
33.0
8.5
8.5
15.4
8.5
E
1.4
1.4
4.2
1.4
Panel
hole
shape
(Single-row)
0.5∼2.0
VL CONNECTOR
(HIGH CURRENT TYPE)
6.2mm pitch/Disconnectable Crimp style connectors Wire-to-wire connectors
(Combined use for both wire-to-wire and wire-to-board connections)
This VL connector is 6.2 mm pitch wire-to-wire
and wire-to-board connector, designed for
large current. The connector suitable for the
large electric current has been realized by
using highly-conducting material, so that the
connection of large current circuit enables.
• Housing lances
• Retainer
•
Suited for large carrent
• Panel lock
Shape I Shape II
Note: 1. Punch holes in the panel according to the figures and table shown above. Burrs must be removed.
2. The strength of the panel must be considered when punching two or more holes.
3. The connector must be inserted from the same side as the hole is punched.
Inner-housing lock Inner-housing lock
Outer-housing lock Outer-housing lock
<2, 3, 4 circuits (Single-row)> <4 circuits (Double-row)>
Standards ––––––––––––––––––––
0 Recognized E60389
1
Certified LR20812
2
R9351103
Panel layout and Assembly layout
Current unit: A
No. of
circuits
Wire size (AWG)
#12
23
23
22
21
#14
18
18
17
16
#16
15
15
14
13
#18
11
11
10
9
#20
9
9
8
8
1
2
3
4
Specifications –––––––––––––––––––
• Current rating: 23 A AC, DC (Refer to the following table.)
• Voltage rating: 600 V AC, DC
• Temperature range: -25˚C to +90˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 7 mΩ max.
After environmental tests/ 10 mΩ max.
• Insulation resistance: 1,000 MΩ min.
• Withstanding voltage: 2,000 VAC/minute
• Applicable wire: AWG #20 to #12
0.5 to 3.5 mm
2
• Applicable panel thickness: 0.5 to 2.0 mm
* In using the products, refer to "Handling Precaution for Terminal
and Connector" described on our website (Technical documents
of Product information page).
* Contact JST for details.
* RoHS2 compliance
Note: The current rating mentioned above is applied only in the combination of
socket contact and pin contact for high current. When either is a normal
product, please be careful because the current rating of the normal
product is applied.
40.5
12.2
40.5
14.6
40.5
40.5
44.1 (including retainer)
44.1 (including retainer)
44.1 (including retainer)
44.1 (including retainer)
19.3
(including retainer)
21.7
(including retainer)
A
B
D
C
E
0.5
±0.13
9.8
±0.13
4.2
±0.13
12.2
±0.13
A
B
D
C
E
9.8
±0.13
18.6
±0.13