Modular design makes it possible to alter the carrier ’s length, on site, in minutes. The unique construc-
tion allows complete flexibility in designing your machine travel and simplifies installing carriers on
machines where required carrier length is not known.
In addition to altering overall length, it is possible to repair PowerFlex while it is installed on
your machine…without having to disconnect hoses or cables or the PowerFlex itself.
Repairs can be made in minutes without having to pull out every hose/cable or
replace the entire carrier.
The fully modular, fully enclosed cable/hose carrier
®
HUBBELL
®
A Hubbell Company
Gleason Reel Corp.
600 South Clark St.
Mayville, WI 53050
Phone: 920-387-4120
Fax: 920-387-4189
P
P
o
w
e
r
F
l
e
x
P
o
w
e
r
F
l
e
x
GLEASON
To shorten or lengthen PowerFlex, use a 3/32" punch to
drive posts out of rivets securing mounting bracket (above)
or links (below). Add or remove links as required. Insert
new drive rivets and seat post with hammer as shown in
lower left illustration. To repair damaged PowerFlex,
remove damaged links and replace. Repairs can be easily
made without removing and restringing cables or hoses
because nylon inner liners in repair kits are split.
Stainless Steel
Inner Link
Mounting
Bracket
Stainless Steel
Outer Link
Nylon
Inner
Liner
Drive Rivet
Part No. 048791.a