MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
KBPC1005 THRU KBPC1010
BR305 THRU BR310
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
3.0 Amperes
1/2
FEATURES
l Low cost construction
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260
o
C/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E method 208C.
l Polarity: Polarity symbols molded on case
l Mounting: Thru hole for #6 screw, 5 in.-lbs torque max.
l Weight:0.093ounce, 2.62 grams
0.270(6.9)
0.230(5.8)
0.75(19.0)MIN
0.08(2.0)MIN
0.034(0.86)DIA
0.028(0.71)TYP
0.85(21.6)
MIN
0.620(15.7)
0.580(14.7)
0.445(11.3)
0.405(10.3)
DIA
0.158(4.0)
0.142(3.6)
0.620(15.7)
0.580(14.7)
AC
+
0.445(11.3)
0.405(10.3)
-
AC
0.10(2.5)x45
°
BR-3
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
o
C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
KBPC1005
BR305
KBPC101
BR31
KBPC102
BR32
KBPC104
BR34
KBPC106
BR36
KBPC108
BR38
KBPC1010
BR310
UNITS
Maximum Repetitive Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 Volts
T
C
=50℃ (Note 2)
3.0
Maximum Average Forward
Rectified Output Current, at
T
A
=25℃ (Note 2)
I
(AV)
2.0
Amps
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
Method)
I
FSM
60 Amps
Rating for Fusing(t<8.3ms) I
2
T 15 A
2
S
Maximum Instantaneous Forward Voltage at 5.0A V
F
1.0 Volts
T
A
=25℃
5.0
µAmps
Maximum DC Reverse Current at rated
DC blocking voltage per element
T
A
=100℃
I
R
0.5 mAmps
Isolation Voltage from case to leads V
ISO
2500
µAmps
Typical Junction Capacitance Resistance (Note 1) C
J
20 ℃/W
Typical Thermal Resistance per element (Note 2)
R
θJA
12
℃/W
Operating Temperature Range T
J
-55 to +150 ℃
Storage Temperature Range T
STG
-55 to +150 ℃
NOTES:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts
2. Unit mounted on 4.0”×4.0”×0.11” thick (10.5×10.5×0.3mm) Al. plate.
3. Unit mounted on P.C.B at 0.375” (9.5mm) lead length with 0.5”×0.5” (12×12mm) copper pads.
Web Site: www.hkmic.com
