Light Source
+
86
10
56370168
www.zolix.com.cn
42
北京卓立汉光仪器有限公司
Zolix Instruments Co.,Ltd.
Light Sources
Power Supply
150
W-
250
W Tungsten-halogen Light Source
—
GLORIA-T
150
A/T
250
A
■
Stable VIS-NIR sources
■
Precision external lamp adjustments
■
Choice of different UV-NIR condensing optics for collimated beam
■
Supports wide range of accessories
The collimated bean diameter is
46
mm and optical axis height is from
157
to
193
mm.
Cooling
Tungsten halogen lamps become up to
900
℃ hot (surface temperature) during
operation. They require a safe, temperature-controlled environment. Below
200
℃ the
halogen cycle does not work. There is also a maximum permitted pinch temperature
which must not in any case be exceeded during operation.
Reflector
A spherical reflector collects the output from the rear of the lamp and focuses it on or near
the arc, for collection by the condenser. The output is increased by as much as
60
%.
LSP-T
150
A LSP-T
250
A
Power(W) 150 300
Current(A) 0-6.5 0~10.8
Voltage(V) 0-25 0~25
Current ripple 0.05% 0.05%
Input voltage(V) 110/220V AC
±
10% 110/220V AC
±
10%
298 mm
137 mm
155 mm
212 mm
41.6 mm
35 mm
27 mm
Safety Tips
■
Although compared to arc and
deuterium lamps it is only a little,
tungsten halogen still produce UV
radiation. Especially in the high
wattages the ultraviolet radiation is
hazardous. Always wear protective
eyewear. When imaging the filament
to small probes you will even need
welding goggles during adjustments
because of glare.
■
Tungsten halogen lamps reach
surface temperatures up to 900
°
C during operation. So the cooling
period can last up to 15 minutes!
Only then is it safe to touch the lamp.
Ordering Information
To build a complete halogen source you will need: Lamp housing, condensing optic,
lamp and adapter, power supply and interface. As an option you might choose the
rear reflector for more output.
The housing has a cooling fan built in that provides the proper air flow.
Lamp adjustment
The housing has precise external lamp adjusters. They let you place the filament
where it is needed. This is important for simplifying fiber and slit illumination. In many
applications this eliminates the need for readjusting any optics located in the beam
path outside the housing.
Model Name Details
GLORIA-
T150A
150w Tungsten-
halogen Light Source
150W Tungsten-halogen Light Source(GLORIA-T150A)
housing(LSH-T150A),
power supply(LSP-T150A), lamp(LSB-T150).
GLORIA-
T250A
150w Tungsten-
halogen Light Source
250W Tungsten-halogen Light Source(GLORIA-T250A)
housing(LSH-T250A),
power supply(LSP-T250A), lamp(LSB-T250).
Lamps
Model Power(W)
Current(A) Voltage(V)
Approx.
flx (lm)
Color
temperature(K)
Average
life (h)
LSB-T150 150 6.25 24 3200 3200 2000
LSB-T250 250 10.5 24 9000 - 300