© Semiconductor Components Industries, LLC, 2012
June, 2018 − Rev. 14
1 Publication Order Number:
1N4001/D
1N4001, 1N4002, 1N4003,
1N4004, 1N4005, 1N4006,
1N4007
Axial-Lead Glass
Passivated Standard
Recovery Rectifiers
This data sheet provides information on subminiature size, axial
lead mounted rectifiers for general−purpose low−power applications.
Features
• Shipped in Plastic Bags, 1000 per bag
• Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to
the part number
• Available in Fan−Fold Packaging, 3000 per box, by adding a “FF”
suffix to the part number
• Pb−Free Packages are Available
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds, 1/16 in. from case
• Polarity: Cathode Indicated by Polarity Band
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
CASE 59−10
AXIAL LEAD
PLASTIC
LEAD MOUNTED RECTIFIERS
50−1000 VOLTS
DIFFUSED JUNCTION
MARKING DIAGRAM
See detailed ordering and shipping information on page 5 of
this data sheet.
ORDERING INFORMATION
A = Assembly Location
1N400x = Device Number
x = 1, 2, 3, 4, 5, 6 or 7
YY = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
www.onsemi.com
A
1N400x
YYWWG
G
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
www.onsemi.com
2
MAXIMUM RATINGS
Rating Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit
†Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
50 100 200 400 600 800 1000 V
†Non−Repetitive Peak Reverse Voltage
(halfwave, single phase, 60 Hz)
V
RSM
60 120 240 480 720 1000 1200 V
†RMS Reverse Voltage V
R(RMS)
35 70 140 280 420 560 700 V
†Average Rectified Forward Current
(single phase, resistive load,
60 Hz, T
A
= 75°C)
I
O
1.0 A
†Non−Repetitive Peak Surge Current
(surge applied at rated load conditions)
I
FSM
30 (for 1 cycle) A
Operating and Storage Junction
Temperature Range
T
J
T
stg
−65 to +175 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
†Indicates JEDEC Registered Data
THERMAL CHARACTERISTICS
Rating Symbol Max Unit
Maximum Thermal Resistance, Junction−to−Ambient
R
q
JA
Note 1 °C/W
ELECTRICAL CHARACTERISTICS†
Rating Symbol Typ Max Unit
Maximum Instantaneous Forward Voltage Drop, (i
F
= 1.0 Amp, T
J
= 25°C) v
F
0.93 1.1 V
Maximum Full−Cycle Average Forward Voltage Drop, (I
O
= 1.0 Amp, T
L
= 75°C, 1 inch leads) V
F(AV)
− 0.8 V
Maximum Reverse Current (rated DC voltage)
(T
J
= 25°C)
(T
J
= 100°C)
I
R
0.05
1.0
10
50
mA
Maximum Full−Cycle Average Reverse Current, (I
O
= 1.0 Amp, T
L
= 75°C, 1 inch leads) I
R(AV)
− 30
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
†Indicates JEDEC Registered Data