Amphenol TCS
200 Innovative Way, Suite 201
Nashua, NH 03062
603.879.3000
www.amphenol-tcs.com
AMPHENOL TCS
TB-2043
VHDM
®
6 ROW,8 ROW, VHDM- HSD
TM
5,6, AND RIGHT ANGLE MALE DAUGHTERCARD
CONNECTOR SINGLE WAFER REPLACEMENT
Revision “H”
Specification Revision Status
Revision SCR No. Description Initial Date
“-“ 25070 Initial Release E. Ekstrom 7-27-98
“A” 25631 Rewritten E. Ekstrom 9-18-98
“B” 26404 Revised in its Entirety C. Murphy 12-18-98
“C”
“D”
26778
38023
Revised in its Entirety
Revised to include HSD 5,6,8
E. Ekstrom
C. Hart
2-19-99
6/19/02
“E” 41011 Added new template, added trade marks, Renamed and
added second stiffener removal instructions
K. Taber 1-24-03
“F” S0080 Replaced template format M.Lee 02-03-06
“G“ S0802 Updated copyright information C Palmer 02-25-08
“H” S2210 Updated to include eHSD5+ rework instructions D Smith 01-11-13
VHDM
®
6 ROW,8 ROW, VHDM- HSD
TM
5,6, AND RIGHT ANGLE MALE DAUGHTERCARD CONN ECTOR
SINGLE WAFER REPLACEMENT
TB-2043
Revision “H“
Copyright © Amphenol Corporation 2013 • All rights reservedPage 2 of 12
1.0 SCOPE
1.1 This technical bulle t i n desc ri bes t he m e t hod for VHDM 6 R ow, 8 Row, VHDM-HSD 5 Row, 6 R ow ,
8 Row and right angle male daughtercard connector single wafer replacement.
2.0 TOOLS
2.1 Stiffener Removal/Installation Tool – Tool No. 600-1875-000
2.2 Right angle male secondary stiffener removal/installation tool – Tool No. 600-2036-000
2.3 Miniature Needle Nose Pliers
2.4 Pallet to Support PC Board (Not Shown)
2.5 Small Press or Plastic Hammer (If Press Not Available) and Delrin Block
2.6 2 Pieces Starrett Feeler Gauge Stock 0.004” Thick, Approximately 4” Long
(not required for eHSD 5+ products)
Figure 1