Datasheet
The DXM100-B2 Wireless Controller is an industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications.
As a communications gateway, it interfaces local serial ports, local I/O ports, and local ISM radio devices to the internet using
either a cellular connection or a wired Ethernet network connection.
• Sure Cross
®
DX80 Wireless Gateway or MultiHop radio with 900 MHz or 2.4 GHz ISM bands
available
• Logic controller with action rules and ScriptBasic programming
• Cellular modem Internet connectivity
• Automation protocols include Modbus TCP, Modbus RTU, and EtherNet/IP
™
• Secure email and text Internet messaging for alarms, alerts, and data log
files
• Data logging with removable SD card
• Interactive programmable user interface with LCD and LED indicators
• Universal, on-board I/O with analog and discrete I/O
• Industry standard RS-485, Ethernet, and USB communication ports
• Multiple managed power options with battery backup
WARNING:
• Do not use this device for personnel protection
• Using this device for personnel protection could result in serious injury or death.
• This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-
energized (off) output condition.
Important:
• Never operate a 1 Watt radio without connecting an antenna
• Operating 1 Watt radios without an antenna connected will damage the radio circuitry.
• To avoid damaging the radio circuitry, never apply power to a Sure Cross
®
Performance or Sure Cross
MultiHop (1 Watt) radio without an antenna connected.
Important:
• Electrostatic discharge (ESD) sensitive device
• ESD can damage the device. Damage from inappropriate handling is not covered by warranty.
• Use proper handling procedures to prevent ESD damage. Proper handling procedures include leaving
devices in their anti-static packaging until ready for use; wearing anti-static wrist straps; and
assembling units on a grounded, static-dissipative surface.
Model Key for the DXM100-B2 Models
B2 =
Radio
Configuration
B2
Base
DXM100-
R1
Blank = None
R1 = 900 MHz, 1 W PE5 Performance Radio (North America)
R2 = 900 MHz, 1 W HE5 MultiHop Data Radio (North America)
R3 = 2.4 GHz, 65 mW PE5 Performance Radio (Worldwide)
R4 = 2.4 GHz, 65 mW HE5 MultiHop Data Radio (Worldwide)
R5 = 900 MHz, 65 mW HE5L MultiHop Data Radio (Used for M-GAGE networks)
R8 = 900 MHz, Performance Radios approved for Australia/New Zealand
R9 = 900 MHz, MultiHop Radio approved for Australia/New Zealand
Smart valve control, SDI-12 data collection
Power: 12−30 V dc/Solar/Battery
Comms: RS-485, (1) SDI-12 sensor interface
Inputs: (4) universal IN
Outputs: (4) NMOS OUT, (2) 0-10 V analog, (2) DC Latching
Power Out: (2) Adjustable 5 V to 24 V switched power,
(1) SDI switched power, and (1) 5 V courtesy power
Some example models include, but are not limited to, the following:
Sure Cross
®
DXM100-B2 Wireless Controller
Original Document
195232 Rev. E
20 December 2018
195232
Models Description
DXM100-B2R1 DXM100-B2 Wireless Controller with DX80 ISM 900 MHz radio
DXM100-B2R2 DXM100-B2 Wireless Controller with DX80 ISM 900 MHz MultiHop radio
DXM100-B2R3 DXM100-B2 Wireless Controller with DX80 ISM 2.4 GHz radio
DXM100-B2R4 DXM100-B2 Wireless Controller with DX80 ISM 2.4 GHz MultiHop radio
Cellular Communication—Controllers accept Banner GSM and LTE modems only. Cellular modems are ordered separately as
accessories under the following part numbers:
• GSM/3G (HSPA): SXI-GSM-001
• LTE-Verizon: SXI-LTE-001
DXM100 Documentation
For more information about the DXM100 family of products, please see additional documentation and videos on the Banner
website:
www.bannerengineering.com
.
• DXM Wireless Controller Sell Sheet, p/n
194063
• DXM100-B1 Wireless Controller Datasheet, p/n
186724
• DXM100-B2 Wireless Controller Datasheet, p/n
195232
• DXM100-Bx Wireless Controller Instruction Manual, p/n
190037
• DXM100-S1 Modbus Slave Datasheet, p/n
195454
• DXM100-S2 Modbus Slave Datasheet, p/n
195231
• DXM100-Sx Modbus Slave Instruction Manual, p/n
188231
• DXM ScriptBasic Instruction Manual, p/n
191745
• DXM Controller Configuration Quick Start, p/n
191247
• DXM Configuration Tool software (p/n
b_4447978
)
• DXM
Configuration Tool Instruction Manual, p/n
158447
• DXM EDS
Configuration file
for Allen-Bradley PLCs
• EIP Configuration File for DXM 1xx-BxR1 and R3 models (p/n
194730
)
• Activating a Cellular Modem (p/n
b_4419353
)
• Additional technical notes and videos
Technical notes, configuration examples, and ScriptBasic program examples are available at
www.bannerengineering.com
.
DXM100-B2 Wireless Controller System Overview
Banner's DXM Logic Controller integrates Banner's wireless radio, cellular connectivity, and local I/O to provide a platform for the
Industrial Internet of Things (IIoT).
Connectivity
Cellular
Sure Cross Radios
Ethernet
USB
RS-485 Master
RS-485 Slave
User Interface
LCD Screen
LED Indicators
I/O
Universal Inputs
Discrete Outputs
Courtesy Power
Switch Power
DC Latching Outputs
Analog Outputs
SDI-12 Sensor Interface
Logic Controller
Action Rules
Programming Language
Scheduler
Push to the Cloud
Data Logging
SMS and Email
SMS Control
Inputs/Outputs—On-board universal and programmable I/O ports connect to local sensors, indicators, and control equipment.
• Universal Inputs
• Discrete outputs
• Courtesy power
• Switch power
• Battery backup
• Solar controller
• DC latching outputs
• SDI-12 sensor interface
Sure Cross
®
DXM100-B2 Wireless Controller
2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 195232 Rev. E