Product data sheet
Automation technology - sensors and actuators
Product description Contacts: 5, cable outlet: 4-6 mm, cable plug connector, plastic lock, screw terminal connection, UL approval
Area M12-A Series 713
Order number 99 0437 43 05
Illustration Scale drawing Contact arrangement
You can find the component part drawing and assembly instructions on the next page.
Technical data
General values
Connector design cable connector
Connector locking system bolted
Termination screw clamp
Wire gauge (mm) 0,75 mm²
Wire gauge (AWG) (18)
Cable outlet 4,0 - 6,0 mm
Upper limit temperature 85 °C
Lower limit temperature -40 °C
Cable data
Approval 1 UL
Electrical values
Rated current (40 °C) 4 A (3 A UL)
Rated voltage 60 V
Rated impulse voltage 800 V
Pollution degree 3
Overvoltage category II
Insulating material group III
Volume resistivity ≤ 8 mΩ
Insulation resistance >10⁸Ω
EMC compliance not shielded
Degree of protection IP67
Mechanical operation > 50 Mating cycles
Material
Contact material CuZn (brass)
Contact plating CuSnZn (Optalloy)
Contact body material PA
Housing material PA
Date: 2018-05-11 - Page 1 of 3
Product data sheet
Automation technology - sensors and actuators
Product description Contacts: 5, cable outlet: 4-6 mm, cable plug connector, plastic lock, screw terminal connection, UL approval
Area M12-A Series 713
Order number 99 0437 43 05
Component part drawing
Assembly instructions / Panel cut-out
Date: 2018-05-11 - Page 2 of 3