Maxim > Design Support > Technical Documents > Application Notes > ASICs > APP 646

Keywords: ASICs, QuickChip, RF, semicustom, custom, HF, asic, RF ASICs, quick chip, semi -custom,

full-custom

APPLICATION NOTE 646

Semicustom QuickChip ASICs Implement RF

Functions to 9GHz

Mar 13, 2000

Abstract: Maxim has two different approaches for developing HF ASICs: a semi -custom QuickChip

design methodology and the more traditional full -custom design methodology. The semicustom design

approach is discussed below and provides a low -cost, fast turn- time approach for developing customer -

designed RF ASICs.

In addition to standard product ICs, Maxim offers a rapid-response ASIC service. Semicustom arrays

known as "QuickChips" provide designers with a selection of uncommitted semiconductor devices:

JFETs, Schottky diodes, ESD - protected diodes, MOS capacitors, trimmable nichrome resistors, and

bipolar transistors with ƒ

s to 27GHz. Completing one of these chips with a custom metal mask set

interconnects the selected components to create a high -frequency, high -performance circuit.

A comprehensive set of design, verification, and layout software tools has been developed to ensure a

high probability that QuickChip designs will meet their target specifications on the first pass. Both UNIX

and PC platforms are supported.

Three different QuickChip families are available. The QC10 family of seven arrays is made with a

complementary bipolar process featuring NPN and PNP ƒ

s of 9GHz and 6GHz, respectively. It is

optimized for analog signal acquisition, amplification, and sourcing.

The QC6 family of four arrays is fabricated in a process with 9GHz NPN and 80MHz PNP ƒ

s. These

arrays are suitable for a wide range of fiber, IF, and instrumentation applications.

The QC9 array is fabricated in a 27GHz process and is intended for RF and HF applications. More than

35 designs have been completed using the QC9 array since its introduction. These include a 900MHz

transceiver, a 7GHz prescaler, several GPS receivers, an OC48 amp-lifier, pulse and window

comparators, and a 2x2 crosspoint switch.

The design examples that follow, reprinted with kind permission of the IEEE, illustrate the

capabilities of QuickChip ASICs.

For further information, or to request a copy of Maxim's High -Frequency ASIC Development

Handbook,contact Maxim's HF ASIC Group, attention Raj Garg, via FAX at 503 - 547 -0810.

Page 1 of 3