MAX1033

Conclusion

The MAX1033BEUP+ successfully meets the quality and reliability standards required of all Maxim products. In addition, Maxim"s

continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim"s quality and reliability standards.

Table of Contents

I. ........Device Description V. ........Quality Assurance Information

II. ........Manufacturing Information VI. .......Reliability Evaluation

III. .......Packaging Information IV. .......Die Information

.....Attachments

I. Device Description

A. General

The MAX1032/MAX1033 multirange, low-power, 14-bit, successive-approximation, analog-to-digital converters (ADCs) operate from a single +5V

supply and achieve throughput rates up to 115ksps. A separate digital supply allows digital interfacing with 2.7V to 5.25V systems using the

SPI(tm)-/QSPI(tm)-/MICROWIRE(tm)-compatible serial interface. Partial power-down mode reduces the supply current to 1.3mA (typ). Full

power-down mode reduces the power-supply current to 1µA (typ). The MAX1032 provides eight (single-ended) or four (true differential) analog input

channels. The MAX1033 provides four (single-ended) or two (true differential) analog input channels. Each analog input channel is independently

software programmable for seven single-ended input ranges (0 to +6V, -6V to 0, 0 to +12V, -12V to 0, ±3V, ±6V, and ±12V), and three differential

input ranges (±6V, ±12V, ±24V). An on-chip +4.096V reference offers a small convenient ADC solution. The MAX1032/MAX1033 also accept an

external reference voltage between 3.800V and 4.136V. The MAX1032 is available in a 24-pin TSSOP package and the MAX1033 is available in a

20-pin TSSOP package. Each device is specified for operation from -40°C to +85°C.