MLESD24B-0603
Multilayer Polymer
• ESD protection for high speed data lines to
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .057 .069 1.45 1.75
B . 027 . 038 0.70 0.95
C . 011 . 019 0.27 0.47
IEC61000-4-2 ESD contact discharge 8KV, max 15KV
IEC61000-4-2 ESD air discharge 15KV
, max 25KV
• Multilayer structure
• Surface mount
• Extremely low capacitance
• Very low leakage current
• Fast response time
• Bi-directional ESD protection
• Lead free solder termination
•
The best ESD protection for high frequency, low voltage applications
Features
Application
• High Definition Multi-Media Interface (HDMI)
• Digital Visual Interface (DVI)
• Display Port Interface
• Unified Display Interface (UDI)
• MDDI Ports
•
Gigabit Ethernet
• USB2.0 and IEEE1394 interface
*
C
aution: This component is designed for signal line protection only, not intended to be
used under bias, not for application with a power line.
DIMENSIONS
0603
D
. 0
08 . 020 0.20 0.50
E
.
035 . 0
40
0.90 1.00
F
.
023 . 028 0.60 0.70
G . 051 . 056 1.30 1.40
Environmental Specifications
• Operation temperature: -40~90
ć
• Moisture Resistance, Steady state: MIL-STD-833,Method 1004.7,
85% RH,85 ,1000hrs
ć
• Thermal Shock: MIL-STD-202,Method 107G,-55 to150 ,30 min
ć ć
cycle,10 cycles.
•
Vibration: MIL-STD-202F, Method 201A, (10 to 55 to 10HZ, 1 min.
cycle, 2hrs each in X-Y-Z)
• Chemical Resistance: ASTM D-543, 4hrs @40 , 3 solutions(H
ć
2
O,
d
etergent solution, deluxer )
• Solder leach resistance and terminal adhesion: Per EIA-576 test
1
of 4
Revision:A 2012/06/01
ESD Suppressor
S
uggested Solder
P
a
d Layout
E
F
G
Micro Commercial Components
130 W Cochran St, Unit B
Simi Valley, CA 93065
Tel:818-701-4933
Micro Commercial Components
M C C
R
Electrical Characteristics
Electrical Characteristics
Parameter Symbol Conditions Min Typ Max Units
Continuous operating voltage V
DC
--- --- --- 24 V
Trigger voltage V
T
IEC61000-4-2 8KV contact discharge --- 500 --- V
Clamping voltage V
C
EC61000-4-2 8KV contact discharge --- 36 --- V
Leakage current I
L
24V V
DC
--- 0.20 10 nA
Capacitance C
P
VR = 0V, f = 1MHz --- 0.15 0.3 pF
Operating Temperature --- --- -40 --- 90
ć
Storage Temperature --- --- -55 --- 150
ć
ESD pulse withstand Pulses EC61000-4-2 8KV contact discharge 2000 --- --- ---
Notes:
1, Trigger and clamping voltage measure per IEC 61000-4-2, 8KV direct discharge method
2
of 4
Revision:A 2012/06/01
MLESD24B-0603
Typical MLESD clamping for +8KV pulse per IEC61000-4-2
Micro Commercial Components
M C C
R