ROLINX® CapEasy and ROLINX® CapPerformance are the
latest additions to the ROLINX product family. These
new products combine the unique capacitor technology
developed by SBE Inc. with the best-in-class laminated
busbars from Rogers Corporation.
The new capacitor-busbar assemblies provide
reduced total system cost, improved reliability
and increased power density compared to currently
available solutions.
SBE Power Ring Film Capacitors™ have very low equivalent
series resistance (ESR) in addition to high aspect ratio
form factors. The result ist higher reliability due to less
heat generation and improved heat transfer from the
capacitors.
When SBE Power Ring Film Capacitors are integrated
with ROLINX laminated busbars, a significant reduction
in equivalent series inductance (ESL) can be achieved
compared with traditional designs.
The result is lower total system cost and increased power
density, due to lower overshoot voltages and less uF/kW of
required total capacitance.
The unique design and assembly process of ROLINX®
CapEasy and ROLINX® CapPerformance allows capacitors
to be mounted back-to-back on opposite sides of the same
bus assembly, resulting in compact designs with improved
cooling compared to traditional “soda can” type film
capacitors.
ROLINX® CapEasy and ROLINX® CapPerformance
integrated capacitor-busbar assemblies were developed
for critical DC link applications in traction drive inverters
for HEV/EV and inverter systems for solar and wind power.
Rogers engineers are ready to work closely with you to
design a cost-effective, reliable and power-dense capacitor-
busbar assembly for your application.
ROLINX
®
CapEasy
ROLINX
®
CapPerformance
Product Information
ROLINX®
CapPerformance
ROLINX®
CapEasy
The information contained in this document is intended to assist you in designing with Rogers’
Power Electronics Solutions Materials. It is not intended to and does not create any warranties,
express or implied, including any warranty of merchantability or fitness for a particular purpose
or that the results shown in this document will be achieved by a user for a particular purpose. The
user should determine the suitability of Rogers ROLINX Busbars for each application. The Rogers
logo, the ROLINX logo and ROLINX are trademarks of Rogers Corporation.
Advantages
// Lower total system cost
// Improved reliability and lifetime
// Increased power density
Typical Applications
// Traction drive inverters for HEV/ EV
// Inverters for solar & wind power
© 2016 Rogers Corporation. All rights reserved. Publication # 57-016 Version 4.16 en.
ROLINX® CapEasy, ROLINX® CapPerformance
Product Information
Rogers BVBA
Power Electronics Solutions - ROLINX
Afrikalaan 188
9000 Gent
Belgium
Phone +32 9 235 36 - 11
Fax +32 9 235 36 - 58
Rogers Technology (Souzhou) Co., Ltd.
No. 18 West Shenhu Road
Suzhou Industrial Park
Suzhou, PRC, 215122
Phone +86 512 62 58 - 2700
Fax + 86 512 62 58 - 2858
www.rolinx.com
Typical Capacitors Technical Characteristics
DC Voltage Rating 450 – 1500 VDC
Capacitance / Tolerance 75 – 1600 µF ±10%
Dielectric / Construction Metallized polypropylene film / design integrated with
a laminated bus bar
Operating Temperature -40°C to +85°C at full DC voltage rating
Encapsulation Molded polymeric case, potted with RTV silicone
Typical Busbar Technical Characteristics
Busbar type ROLINX® Easy ROLINX® Performance
DC Voltage Rating 1.5kV up to 12kV
Power
Up to 1MW Up to several MW
Operating Temperature
-40°C to +105°C -40°C to +105°C
Relative humidity
55°C / 95% RH 55°C / 95% RH
Conductor material
Tin plated copper Tin plated copper
Insulation material
Polyester dielectric film,
rigid insulation board
Polyester dielectric film,
rigid insulation board
Detailed specifications of SBE Power Ring Film Capacitors™
are available as separate documents.
The Power Ring Film Capacitor™ is a patented technology of SBE Inc.
Features
// Low ESL
// Low ESR
// High aspect ratio
// Back to back mounting