Leaflet
100 Gbit/s Optical Module
Evaluate Solution
All-in-one Instrument for BERT and Eye-Pattern Analysis
BERT Wave MP2110A
Data volumes are growing exponentially as providers offer new applications.
On the other hand, data centers are trying to hold down system equipment costs
while manufacturers of optical modules require less expensive but expandable test
instruments supporting the transition from 10G to 25G and higher bit rates.
The BERTWave MP2110A is targeted at production of optical module for 100 GbE/
25 GbE and combines a BERT (Bit Error Rate Test) and Sampling Oscilloscope (Eye
Pattern Analysis) in an All-in-one cabinet. It increases optical module production
efficiency and helps reduces production costs.
Flexible Configuration
• All-in-one: BERT + Sampling Oscilloscope
• Fast measurement: Simultaneous BER measurements and Eye pattern analysis
• Low price: Functions and performance for manufacturing
• Excellent usability: Simple GUI
• Compatibility: Command compatibility with MP2100A/B
• Stability: Stable built-in CPU
Excellent Basic Functions
■
Sampling Oscilloscope
• Wide bandwidth
Optical: 35 GHz (SMF), 25 GHz (MMF)
Electrical: 40 GHz
• Fast sampling: 250 ksamples/s
• High sensitivity: –15 dBm (typ., SMF)
• Low noise O/E: 3.4 μW (typ., SMF)
• Precision Trigger option: 200 fs rms (typ.)
■
4ch BERT
• Operation frequency: 24.3 Gbit/s to 28.2 Gbit/s
• High sensitivity ED: 25 mV (typ.)
• Selection of required channels from 1/2/4ch
• PPG with low Data Jitter (600 fs rms, typ.) and low waveform distortion
http://www.anritsu.com
MP2110A-E-A-2-(1.00) 2017.02 ddcm/CDT
25.78125 Gbit/s Electrical Loopback Waveform
(PRBS 31, Amplitude 200 mV,
Precision Trigger Option On)
Reference
Light Source
Optical 1ch, Electrical 2ch (Differential 1ch)
Optical 1ch + Electrical 1ch, Optical 2ch,
Sampling Oscilloscope
BERTWave MP2110A
4ch ED
4ch PPG
Optical Eye Pattern
(Jitter/Tr, Tf/EXR...)
Mask Margin
Electrical Eye Pattern
(Jitter/Tr, Tf...)
Mask Margin
Sensitivity
BER Curve
Optical Attenuator
DUT
25 Gbit/s × 4
Optical Spectrum Analyzer
MS9740A
Optical Switch
Target Applications
• 25G/100G Optical Transceiver Module (CFP2/CFP4/QSFP28/SFP28)
• High-speed optical engine
• Active Optical Cable (AOC)/Direct Attached Cable (DAC)
• Optical devices (TOSA/ROSA)
Typical Waveforms
Specification
BERT
Bit Rate
24.3 Gbit/s to 28.2 Gbit/s
9.5 Gbit/s to 14.20 Gbit/s (MP2110A-093)
Interface Differential, Channel: 1/2/4 ch (Option)
Format NRZ
Pattern
PRBS 7, 9, 15, 23, 31,
1/2 Clock Pattern, 1/16 Clock Pattern
Data Output
Amplitude : 0.1 V to 0.8 V (single)
Tr/Tf : 15 ps (typ., 20 to 80%)
Jitter (RMS) : 600 fs rms (typ.)
Data Input
Sensitivity : 25 mVp-p (typ.)
Amplitude : 0.05 V to 0.8 V
Scope
Electrical
Bandwidth
(–3 dB)
40 GHz
Flatness ±1 dB (10 MHz to 30 GHz, typ.)
Noise RMS 3.0 mV rms (typ.)
Optical
Wavelength
SMF: 860 nm to 1650 nm
MMF: 800 nm to 860 nm
Bandwidth
(Unfiltered)
SMF: 35 GHz (typ.)
MMF: 25 GHz (typ.)
Filter 100 GbE, OTU4
Sensitivity –15 dBm (typ., SMF)
Noise 3.4 μW (typ., SMF)
Sampling Speed 250 ksamples/s
Model/Code Name
MP2110A
Main Frame
BERTWave
MP2110A-011
MP2110A-012
MP2110A-014
MP2110A-093
BERT
1ch BERT
2ch BERT
4ch BERT
PPG/ED Bit Rate Extension
MP2110A-021
MP2110A-022
MP2110A-023
MP2110A-025
MP2110A-026
MP2110A-024
Oscilloscope
Dual Electrical Scope
Dual Optical Scope
Optical and Single-ended Electrical Scope
Optical Scope for Singlemode
Optical Scope for Multimode
Precision Trigger
Model/Code Name
G0344F
G0347F
G0349F
Optional Accessory
<Optical Switch>
Optical Switch (1×4, SM9, FC/UPC)
Optical Switch (1×4, GI62.5, FC/UPC)
Optical Switch (2×4, GI62.5, FC/UPC)
G0350F
G0354F
<Optical Attenuator>
Programmable Optical Attenuator
(SM9, FC/UPC)
Programmable Optical Attenuator
(GI62.5, FC/UPC)
Ordering Information
Please specify the model/order number, name and quantity when ordering.
The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name.