SPECIFICATION CONTROL DRAWING
307 Constitution Drive Menlo Park, CA 94025, U S A
Wire and
Harnessing
Products
TITLE :
SOLDERSLEEVE DEVICE
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
DOCUMENT NO.:
W-040-03
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
DCR NUMBER:
D010541
REPLACES:
N/A
DRAWN BY:
M. FORONDA
DATE:
9-Oct-01
PROD. REV.
C
DOC ISSUE:
0
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Pb36 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
APPLICATION
1. This controlled soldering device is designed for termination of a stranded wire (AWG26 to AWG30) having an insulation
rated for at least +125°C, onto a pin (0.5mm sq.).
2. Temperature range: -55°C to +150°C.
For best results, prepare the wire as shown: