FSP1200-50ADB Meet 80 PLUS Gold, RoHS Compliant 1200 Watts ATX Switching Power Supply
■Full modular cable management.
■Active Power Factor Correction (PFC) meet EN61000-3-2
■High efficiency and reliability
■Compatible with European Union Directive 2011/65/EU & (EU)2015/863 (Restriction on Hazardous Substances).
■Remote ON/OFF function
■Internal 12V DC fan included
■With AC input I/O switch.
■Low noise and ripple
■Output over voltage, short circuit, and over current protection
■100% Hi-pot, ATE, and burn-in tested
■Re-settable power shut down
■Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
■Approved by CB 62368 & 60950-1 2 nd , EMC. UL TUV, FCC.
●Specification
■Temperature Range:
▲Operating: 0°C ~ +50°C
▲Storage & shipping: -20°C ~ +80°C
■Humidity:
▲operating: 10~90% RH, Non-condensing,
▲Storage: 95% RH, Non-condensing,
■Dielectric Withstand: Primary frame ground 1800V AC for 2 second
■Efficiency: Typical > 90%
■Altitude: Operation Altitude : 5000 meters above sea level.
■Standby Power consumption (5Vsb)
■Rise time: Less than 20ms
■Hold-up Time: 17 ms minimum at 80% full load.
■Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
■Leakage Current: Less than 3.5mA at 264Vac, 63Hz
■MTBF:A minimum predicted MTBF (MIL-HDBK-217) of 100,000 hours of continuous operation at +25°C.
■Dimensions (LxWxH): 190x150x86mm / 7.49x5.91x3.4inch
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2019/6/28 |
|
|
|
|
|
135 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.