UG342: EFR32MG12 2400 / 868-915 MHz 19 dBm Radio Board User’s Guide
A Wireless Starter Kit with the BRD4170A Radio Board is an excellent starting point to get familiar with the EFR32™ Mighty Gecko Wireless System-on-Chip, and it provides all necessary tools for developing a Silicon Labs wireless application.
BRD4170A is a plug-in board for the Wireless Starter Kit Mainboard. It is a complete reference design for the EFR32MG12 Wireless SoC, with 19 dBm output power, a PCB antenna for the 2.4 GHz band, and an SMA connector and a wide-band matching network for operation in either the 868 MHz or the 915 MHz band.
The Wireless Starter Kit Mainboard contains an on-board J-Link debugger with a Packet Trace Interface and a Virtual COM port, enabling application development and debugging the attached radio board as well as external hardware. The Mainboard also contains sensors and peripherals for easy demonstration of some of the EFR32's many capabilities.
This document describes how to use the BRD4170A Radio Board together with a Wire-less Starter Kit Mainboard.
BRD4170A RADIO BOARD FEATURES:
• EFR32MG12 Mighty Gecko Wireless SoC with 1024 kB Flash, and 256 kB RAM(EFR32MG12P433F1024GM68)
• Dual band integrated radio transceiver
• 19 dBm output power
• Inverted-F PCB antenna (2.4 GHz)
• SMA antenna connector (868-915 MHz)
• 8 Mbit low-power serial flash for over-the-air upgrades.
WIRELESS STK MAINBOARD FEATURES:
• Advanced Energy Monitor
• Packet Trace Interface
• Virtual COM Port
• SEGGER J-Link on-board debugger
• External device debugging
• Ethernet and USB connectivity
• Silicon Labs Si7021 Relative Humidity and Temperature sensor
• Low Power 128x128 pixel Memory LCD
• User LEDs / Pushbuttons
• 20-pin 2.54 mm EXP header
• Breakout pads for Wireless SoC I/O
• CR2032 coin cell battery support
The EFR32MG12 Mighty Gecko Wireless SoC itself is featured on a Radio Board that forms a complete reference design, including the RF section and other components.
The Radio Board plugs directly into a Wireless Starter Kit Mainboard. The Mainboard features several tools for easy evaluation and development of wireless applications. An on-board J-Link debugger enables programming and debugging on the target device over USB or Ethernet. The Advanced Energy Monitor (AEM) offers real-time current and voltage monitoring. A virtual COM port interface(VCOM) provides an easy-to-use serial port connection over USB or Ethernet. The Packet Trace Interface (PTI) offers invaluable debug information about transmitted and received packets in wireless links.
All debug functionality, including AEM, VCOM and PTI, can also be used towards external target hardware instead of the attached radio board.
To further enhance its usability, the Mainboard contains sensors and peripherals demonstrating some of the many capabilities of the EFR32MG12.
| 世强硬创平台www.sekorm.com | |
| 世强硬创平台电子商城www.sekorm.com/supply/ | |
| 世强硬创平台www.sekorm.com | |
| 世强硬创平台www.sekorm.com |
- +1 Like
- Add to Favorites
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Recommend
UG342: EFR32MG12 2400 / 868-915 MHz19 dBm Radio Board User's Guide
September 2022 - User's Guide
WIRELESS GECKO WIRELESS SYSTEM-ON-CHIP,无线电板,RADIO BOARD,无线SOC,WIRELESS SOC,无线启动套件主板,无线GECKO无线片上系统,无线PRO KIT主板,无线入门套件,WIRELESS PRO KIT MAINBOARD,WIRELESS STARTER KIT MAINBOARD,WIRELESS STARTER KIT,SLWRB4170A,EFR32MG12,BRD4002A,EFR32MG12P433F1024GM68,BRD4001A,SLWSTK6007A,EFR32,BRD4170A
More Version(s)UG193: EZR32HG 490 MHz 20 dBm Wireless Starter Kit User's Guide
8 December, 2017 - User's Guide
无线电板,PLUG-IN BOARD,RADIO BOARD,无线启动套件主板,MICROCONTROLLER,微控制器,无线入门套件,插件板,WIRELESS STARTER KIT MAINBOARD,WIRELESS STARTER KIT,MCU,单片机,BRD4545A,SLWSTK6243A,EZR32HG,SLWRB4545A,EZR32,EZR32™
UG562: SiWG917 Single-band Wi-Fi and BLE with 8 MB Flash Radio Board User's Guide
December 2023 - User's Guide
无线电板,RADIO BOARD,PLUG-IN BOARD,无线SOC,WIRELESS SOC,无线PRO套件,无线PRO KIT主板,WIRELESS PRO KIT MAINBOARD,WIRELESS PRO KIT,插件板,SIWX917-PK6031A,BRD4338A,SIWG917,SIWX917-RB4338A,BRD4002A,SIWG917M111MGTBA
More Version(s)EFR32xG27 2.4 GHz 8 dBm Radio Board
November 14, 2022 - Schematics
无线电板,RADIO BOARD,EFR32XG27,BRD4194A,EFR32
BGM13S Radio Board
2017.08.07 - Outline Dimension Drawing
无线电板,RADIO BOARD,BGM13S32,BGM13S22,BGM13S12,BGM13S02,BGM13S
More Version(s)UG144: EFR32BG1 2.4 GHz 10.5 dBmRadio Board User's Guide
2018/07/01 - User's Guide
无线电板,RADIO BOARD,BLUE GECKO无线SOC,无线入门套件,BLUE GECKO WIRELESS SOC,WIRELESS STARTER KIT,SLWSTK6020B,EFR32BG1,EFR32BG1P232F256GM48,EFR32,SLWRB4100A
More Version(s)UG317: EFR32FG14 2400/915 MHz 19 dBm Dual Band Radio Board and Wireless Starter Kit User's Guide
2017-10-16 - User's Guide
无线电板,RADIO BOARD,PLUG-IN BOARD,无线入门套件,插件板,WIRELESS STARTER KIT,EFR32FG14 2400,BRD4257A,SLWRB4257A,EFR32FG14 915,SLWSTK6060B
UG281: EFR32MG13 2.4 GHz 10 dBm Wireless Starter Kit User's Guide
2018-05-03 - User's Guide
无线电板,RADIO BOARD,无线入门套件,MIGHTY GECKO无线SOC,MIGHTY GECKO WIRELESS SOC,WIRELESS STARTER KIT,EFR32MG13,SLWRB4159A,EFR32MG13P632F512GM48,EFR32
More Version(s)EFR32xG22E 2.4 GHz 6 dBm QFN40 Radio Board schematic
January 22, 2024 - Schematics
无线电板,RADIO BOARD,BRD4415A,EFR32XG22E
EFR32 2.4GHz Radio Board
2018.06.19 - Product Drawing
无线电板,RADIO BOARD,EFR32MG13,BRD4177A,EFR32,BRD4177
More Version(s)UG260: EFR32MG12 2.4 GHz 19 dBm Wireless Starter Kit User's Guide
2017-02-10 - User's Guide
无线电板,RADIO BOARD,PLUG-IN BOARD,无线入门套件,插件板,WIRELESS STARTER KIT,SLWSTK6000B,SLWRB4161A,EFR32MG12
UG261: EFR32MG12 2.4 GHz 10 dBm Wireless Starter Kit User's Guide
2017-03-08 - User's Guide
无线电板,RADIO BOARD,PLUG-IN BOARD,无线入门套件,插件板,WIRELESS STARTER KIT,SLWSTK6000B,SLWRB4162A,EFR32MG12
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization