TAZ SERIES HRC5000 Medical Implantable Grade
2020-06-24
The TAZ HRC5000 Medical Grade series is designed for use in medical implantable applications. These are based off of the MIL- PRF-55365 case sizes and feature extremely low DC leakage levels well below typical values.These components are manufactured and tested in the AVX Biddeford Maine factory which is ISO 13485 certified. Weibull grading and surge current testing options per MIL-PRF-55365 are available along with several plating options including tin/lead solder, 100% tin, or gold terminations.To request an additional rating not listed here, or for more information on HRC5000 testing details, please contact the factory.For moisture sensitivity levels please refer to the High Reliability Tantalum MSL section located in the back of the High Reliability Tantalum Catalog.
- +1 Like
- Add to Favorites
Recommend
More>
- KYOCERA AVX Components Corporation to Acquire ROHM Co., Ltd.’s Tantalum and Polymer Capacitor Business Assets
- KYOCERA Lanuched Ultra-Small Crystal Units CX1008SB Series Achieving the Same Performance as Kyocera‘s Previous With A 33% Reduction in Size
- KYOCERA Introduces 0.5mm-pitch One-Action-Lock FPC/FFC Connectors 6893 Series Bringing 2x Improvement in Foreign Matter Removal Performance
- Kyocera Launches 5814 Series 0.3mm Pitch Board-to-Board Connector, with a Stacking Height of 0.6mm and Width of 1.5mm
- KYOCERA Launches a New 0.5mm-pitch Floating Board-to-board Connector for High-speed 16gbps Data Transmission
- KYOCERA Miniaturizes Electronics Connector by 50 Percent in New 5811, Ideal for Wearables
- KYOCERA‘s New Temperature-Compensated Crystal Oscillator Offers Industry‘s Lowest Phase Noise for 5G, Wi-Fi
- Kyocera and Digital Grid Begin Joint Demonstration of Renewable Peer-to-Peer Power
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.