16-Bit Modular Microcontroller MC68HC16V1 Technical Summary
M68HC16 controllers are built up from standard modules that interface through a common internal bus. Standardization facilitates rapid development of devices tailored for specific applications.
The MC68HC16V1 incorporates a true 16-bit central processing unit (CPU16), a stream-lined integration module (SLIM), a queued serial module (QSM), and a general-purpose timer (GPT). These modules are interconnected by the intermodule bus (IMB).
Maximum system clock for the MCU is 20.97 MHz. A phase-locked loop circuit synthesizes the clock from a frequency reference. Either a crystal (32.768 kHz for slow reference mode or 4.194 MHz for fast reference mode) or an externally generated signal can be used. System hardware and software support changes in clock rate during operation. Because the MCU is a fully static design, register and memory contents are not affected by clock rate changes. High-density complementary metal-oxide semiconductor (HCMOS) architecture makes the basic power consumption of the MCU low. Power consumption can be minimized by stopping the system clock. The M68HC16 instruction set includes a low-power stop (LPSTOP) command that efficiently implements this capability.
|
SPMC16V1CPU20 、 MC68HC16V1CPU20 、 MC16V1CPU20B1 、 MC68HC16V1 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
100-Pin TQFP |
|
|
English Chinese Chinese and English Japanese |
|
|
2019/02/08 |
|
|
|
|
|
MC68HC16V1TS/D |
|
|
3.4 MB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- C-V2X Certification – Necessary or Just Nice to Have?
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
- Premo Launches PLC-LW-Series Transformer Family for Power Line Communication
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
